3-Phase AC Electric-Oil Cooled (AC-50/AC-51) Motor
Marine Drive Systems Manufactured For Sailboats, Harbor Cruisers, Canal Boats
Header Content Region
Insert text, image or banner ads here, or just delete this text and leave this area blank!
Innovation in Motion, Powered by Electricity
To assist you, our customers, we have compiled all the documentation needed to wire, program and troubleshoot. The wiring diagrams include documentation for on-road vehicles, golf cars and hydraulic pump applications. Click on the graphic above to open the page with the information.
What's NewWe have included a variation of the AC-20 motor called AC-23! The motor is wound to produce higher torgue compared to the AC-20 motor! Please check AC-2X motor page for more information!
AC 2x Family of Motors
HPEVS AC Electric-Oil Cooled Motor Drive Systems (AC-50/AC-51)
We are proud to introduce our new line of Oil Cooled AC motors that are now available.
With the introduction of oil cooling and with the assistance of an external oil pump and an heat exchanger to cool the oil, the continuous horsepower and torque from this motor will be higher than our standard steel frame motor line.
This motor has been designed with the marine industry in mind, but it can be adapted to any other mode of transportation. The motor includes a stainless steel frame with the shaft of the rotor being made of stainless steel too. With anodized aluminum end bells and junction boxes, the motor can stand up to a salt environment.
The motor is the same 8" diameter as the standard steel frame AC-5X motors but now with the use of a junction box, the total height is a little over 11".
The motor is totally sealed which allows for the oil to cool all the internal surfaces of the motor.
Please keep in mind that this new oil cooled design was made with the marine industry in mind. On a marine vessel there is a constant flow of cool lake/ocean water that is supplied to the heat exchanger to cool the oil effectively. If these new systems are installed in anything other than marine, performance results may vary based on how cool the oil is returning to the motor.
The weight of the AC 50 and AC 51 oil cooled motors are 120 pounds/54.4 Kg.
Here is a list of the typical applications for which this motor can be applied:
» Ground Support
» Utility Vehicles
• 1236SE-5621 (48V 600A)
• 1238E-6521 (48-80V 550A)
• 1238R-7601 (72-96V 650A)
• 1239E-8521 (144V 500A) » 12 volt logic «
OC AC 5X-32.26Oil Cooled "B" Face
1 1/8" Keyed Shaft with an
7/8" Auxiliary Keyed Shaft
OC AC 5X-32.28Oil Cooled "B" Face
1 1/8" Keyed Shaft Single Shaft
Link to power graphs:
Link to power graphs:
Please contact us with any questions you might have:
Of course all our systems are backed by an HPEVS and Curtis