"Innovation in Motion,
Powered by Electricity"
Header Content Region
Insert text, image or banner ads here, or just delete this text and leave this area blank!
Innovation in Motion, Powered by Electricity
To assist you, our customers, we have compiled all the documentation needed to wire, program and troubleshoot. The wiring diagrams include documentation for on-road vehicles, golf cars and hydraulic pump applications. Click on the graphic above to open the page with the information.
What's NewWe have included a variation of the AC-20 motor called AC-23! The motor is wound to produce higher torgue compared to the AC-20 motor! Please check AC-2X motor page for more information!
AC 2x Family of Motors
AC 9 Family of Electric Motors
The AC-9 motor is our original "Golf Car" motor. It has proven to be very versatile and has been used in a variety of applications. This motor has been used in everything from mining vehicles to hydraulic pump to ground support equipment to name a few.
With a 48 volt system driving this motor, you should expect to see as much as 28 horsepower and 70 ft-lbs. of torque at 650 Amp.
The weight of this motor is around 50 pounds/22.7 Kg.
Link to power graphs: AC-9 POWER GRAPHS!!
Here is a list of the typical applications for which this motor can be applied:
• Golf Car
• Utility Vehicle
• Hydraulic Pump
Please contact us with any questions you might have:
Of course all our systems are backed by an HPEVS and Curtis
Included in the package with this motor is the controller of your choice based on the amount of current needed to drive the vehicle efficiently, wiring harness (generic or specific based on your needs), dash display and an controller mounting plate. Also available are #2 battery/motor cables. The #2 battery/motor cables are needed with all our golf car system. We offer these cables as an option to purchase, but you can make your own cables as well.
Controller Options are as follows:
• 1234-5371 (48V 350A)
• 1236-5401 (48V 450A)
• 1238-5601 (48V 650A)
AC 9-03.27C-Face Adaptor
NEMA C-face end plate 7/8" shaft w/ 3/16" key way
AC 9-05.02Mining Vehicle Motor
3/4" shaft w/ 3/16" key way for brake end
AC 9-06.06Hydraulic Pump Motor
SAE "A" pump adaptor w/ SAE coupler integrated mounting plate