Newsletter Signup
AC 3X
The AC 35 motor is designed for use in multiple applications that are listed below. It is capable of producing 63 horsepower at 2900 RPM while delivering 129 ft-lbs. of torque at 96 volts, and 650 amps(1238-7601). It is available in several different configurations depending on your needs.
In addition to the AC 35 motor we are producing a second version of the same motor size and calling it an AC 34. This motor was designed to extend the "knee" out further into the RPM range. So with the same 96 volt/650 amp controller(1238-7601), the torque reduces a bit down to 107 ft-lbs. of torque while the horsepower increases to 65 horsepower. All of these subtle changes and the knee extending out to 3800 RPM.
The motor identifications on this page have been changed to "AC 3X" to reflect the addition of the AC-34 into the AC-35 family.
The weight of this motor is around 85 pounds/38.5 Kg.
Link to power graphs: AC-34 POWER GRAPHS!!
Link to power graphs: AC-35 POWER GRAPHS!!
Here is a list of the typical applications for which this motor can be applied:
• Utility Vehicles
• Light Automotive
• Ground Support
• Motorcycle
• Mining
• Hydraulic Pump
Please contact us with any questions you might have:
Of course all our systems are backed by an HPEVS and Curtis
Controller Options are as follows:
• 1238-6501 (72V 550A)
• 1239E-7621 (96V 650A) » 12 volt logic «
• 1239E-8521 (144V 500A) » 12 volt logic «
AC 3X-16.0219 SplineDana/Spicer or Team Industries differential |
AC 3X-19.0219 SplineTaylor-Dunn style differential Enclosed (not water proof) housing |
AC 3X-26.25B-Face1 1/8" keyed shaft |
AC 3X-26.34B-Face Vented1 1/8" Keyed Stub Shaft with 7/8" Auxiliary Shaft |
AC 3X-27.25B-Face1 1/8" keyed shaft Enclosed (not water proof) housing |
AC 3X-28.25C-Face1 1/8" keyed shaft |